Views: 3 Author: Site Editor Publish Time: 2021-10-15 Origin: Site
The bulk feed delivery truck is equipped with a truck as the chassis to provide power, and a feed silo that can hold 20 tons to 40 tons of feed. It is mostly used to provide sufficient feed for farm breeding and animal husbandry, and to transport the feed to the corresponding factory when it is sold. The farm that placed the order. Excluding the transportation process of bulk feed delivery trucks between the factory and the farm, more usage scenarios are unloading in the farm and the general workflow. The following is an introduction to the use of bulk feed delivery trucks on the farm and general work Process.
Use scenario one of bulk feed delivery truck: unloading in the farm
Use scenario two of bulk feed delivery truck: basic workflow
Precautions for the use of bulk feed delivery truck in the above two scenarios
The unloading steps and detailed process of the bulk feed delivery truck during the unloading process: the first step is the feeding auger; the second step is the lifting auger; the third step is the output auger. Finally, three places are hydraulically controlled screw conveying The system realizes the automatic unloading of the storage tower. The whole process of how the bulk feed delivery truck is fully unloaded: When a bulk feed delivery truck arrives at the storage tower of the breeding farm or livestock farm, it is necessary to check whether the various operating handles on the feed truck are intact. The first thing we need to know about the bulk feed delivery truck is that the screw machine is decisive in the entire unloading process. All the work we have done before is to be able to connect with the screw machine rotation of each part to achieve the docking of the storage tower to realize the discharge. The first is to make the unloading valve (the main function of the unloading valve is to automatically control the unloading or loading of the pump. When the about the bulk feed delivery truck’s system pressure reaches the overflow opening pressure, the overflow valve opens, and the pump unloads when the system pressure drops to overflow. When the pressure of the valve is closed, the overflow valve is closed, and the pump loads the system) is in the open unloading state, the clutch is disconnected, and the power take-off switch is closed and is in working state. Then there is the second step: when you are ready, turn on the tilt, vertical screw motor control handle, and horizontal screw motor control handle in turn. The feed of the about the bulk feed delivery truck can be continuously transported to the storage tower by these three augers and used as a feed truck. When planting feed, you must first unload the first feed in the two normally open bins in the middle of the box, and then open the front and back two normally closed bin doors to drive the feed cart to the storage tower of the second feed. Repeat the unloading of the first feed. process.
When the bulk feed delivery truck is working, first open the receiving ports of the two middle bins at the top of the box body, fill the first type of feed and ensure that each bin is loaded with 3T, and then open the first and last two bins to load the second feed.
These two warehouses are normally closed and have separate warehouse openings, so two feeds of the bulk feed delivery truck can also be loaded separately, so as to realize the function of loading three different feeds in the whole vehicle. After the unloading reaches the storage tower of the farm, check the operating handles. After reaching the storage tower of the farm, check the operating handles to make the unloading valve open. Disconnect the clutch and close the power take-off switch. When ready, turn on the tilt, vertical screw machine motor control handle, and horizontal screw machine motor control handle in turn. The feed can be continuously transported to the storage tower through these three augers. When the bulk feed delivery truck two types of feed, it must first Unload the first feed in the two normally open bins in the middle of the box, then open the normally closed doors of the front and rear bins, drive the feed cart to the storage tower of the second feed, and repeat the unloading process of the first feed, Finally open the normally closed door of the rear bin, and drive the car to the third feed storage tower to complete the full unloading process
Matters needing attention in the work process: pay attention to adjust the engine speed at the idle vertical handle and put it in the lifting position, close the control handle when the cylinder piston rod extends and the tilt screw machine is lifted to the corresponding height of the turret, and the worm gear is used to decelerate the shaking. The discharge port of the rotating screw machine is adjusted and the inclined screw machine of the bulk feed delivery truck is connected to the mouth of the storage tower.
Precautions at the end of the first part of the overall unloading process: pay attention to adjusting the engine speed at idle and the vertical handle is placed in the lifting position. When the cylinder piston rod of the bulk feed delivery truck is extended, the tilt screw machine is lifted to the corresponding height of the turret. Close the joystick and use the worm gear The worm decelerating crank handles the rotating screw machine to adjust the tilt screw machine discharge port and the storage tower port.
You can choose to buy the bulk feed delivery truck you like according to your preferences, log on to our company's official website, Chengli Automobile welcomes you to buy, there is more detailed information on it for free browsing.