Material: | |
---|---|
Availability: | |
Quantity: | |
FY5180SGXF
FOTON FAW ISUZU HOWO SHACMAN DONGFENG
II. Details of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
III.Specification of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
TECHNICAL SPECIFICATION | ||||||
Main specification | Chassis brand | HOWO | ||||
Chassis model | ZZ1047 | |||||
Overall dimension(L*W*H) | mm | |||||
Water tank volume | 2,500 LITRES | |||||
Foam tank volume | 500 litres | |||||
Cabin | double cabin | |||||
Chassis | Drive modle | 4x2 Right hand drive | ||||
Front axle loading | 2,400 kg loading capacity | |||||
Rear axle loading | 4,200kg loading capacity | |||||
Wheel Base | 3800mm | |||||
Front/rear suspension | 1015/2040mm | |||||
Approach/departure angle | 24/12 (°) | |||||
Tyre size & number | 7.50R16 Radial tire, with one spare tyre | |||||
Transmission | manual, 6 forwarder & 1 reverse | |||||
Voltage | Have 2 batteries , each 12 volts | |||||
Color | Red and white including tanker , standard . | |||||
Brake | Air brake | |||||
Max speed | 95km/h | |||||
Engine | Brand | YUNNEI POWER | ||||
Model | YN4102QBZL | |||||
Engine Type | 4-cylinder, in-line, water cooling, direct injection(DI) type, turbocharged, intercooling | |||||
Horse power | 116HP | |||||
Displacement | 3760ml | |||||
Emission | Euro III | |||||
TANK SPECIFICATION | ||||||
Tank capacity | 2,500 LITRES WATER TANK WITH 500 LITRES FOAM TANK | |||||
Tank material | Water tank made of carbon steel . Thickness:4mm, The foam tank is made of stainless steel | |||||
Fire pump | Model | / | CB10/30 model ,Normal pressure pump | |||
Pressure | Mpa | ≥1.0 | ||||
Max suction height | m | 7 | ||||
Flux | L/M | 1800 | ||||
Rated speed | r/min | 3000 | ||||
Time of drawing water (s) | s | ≤45 | ||||
Input | / | one nozzle , diameter : 100mm | ||||
Outlet | / | 2 nozzles, diameter: 65mm | ||||
Water-foam shooter (Monitor) | Model | / | PL24,mounted on the tank as photo,standard | |||
Fire fighting nozzle range | Water (m) | ≥45 | ||||
Foam (m) | ≥40 | |||||
Flux | L/min | 1440 | ||||
Rated Working pressure | Mpa | 0.7-1.2 | ||||
Rotation angle | (°) | 360 | ||||
Standard configuration | Have alarm rotating light and which is mounted on top of the cabin , have ladder , have manhole | |||||
EQUIPMENT LIST | ||||||
Category | Item | Specification | Quantity | |||
Fire-fighting equipment | Chassis Accessory(tools) | / | 1 | |||
Suction pipe | 150×4cm | 2 | ||||
Water filter | FLF150 | 1 | ||||
Water separator | FII80/65×3-1.6 | 1 | ||||
Siamese | JII150/80×2-1.0 | 1 | ||||
Fire hoses | 13-65-20 | 6 | ||||
Fire hoses | 13-80-20 | 4 | ||||
Increaser | KJ65/80 | 2 | ||||
Hose gaiter | DT-SB | 4 | ||||
Fire-hose protector | Length570 | 1 | ||||
Rope hose tool | / | 4 | ||||
Overground hydrant wrench | QT-DS1;Length400 | 1 | ||||
Underground hydrant wrench | Length860 | 1 | ||||
Suction wrench | FS150 | 2 | ||||
Water-stream Switch nozzle | QZG3.5/7.5;65 | 1 | ||||
Water-stream spray nozzle | QZK3.5/7.5;65 | 1 | ||||
Fire bucket | / | 1 | ||||
Aspirator foam nozzle(include pipette) | QP8/0.7Z;65 | 1 | ||||
Bubble pipette assy | Φ40×2700 | 1 | ||||
First fire Reel | DN25 ,40m | 1 | ||||
Fire forcible entry tool | Fire extinguisher | 3KG | 1 | |||
Shovel | Length1050 | 1 | ||||
Fire Axe | QTF-PF; Length 810 | 1 | ||||
T-shaped pick | QTF-DG;Length 830 | 1 | ||||
Persuader | Length 1060 | 1 | ||||
Chassis engine spare parts | Oil filter | / | 2 | |||
Fuel filter | / | 2 | ||||
Air filter | / | 2 | ||||
Belt for AC | / | 2 | ||||
Fan belt | / | 2 |
IV.Fire Truck Details
V.Fire Truck Production workshop and testing
VI.SHIPMENT ( RORO or BULK VESSEL)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
II. Details of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
III.Specification of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
TECHNICAL SPECIFICATION | ||||||
Main specification | Chassis brand | HOWO | ||||
Chassis model | ZZ1047 | |||||
Overall dimension(L*W*H) | mm | |||||
Water tank volume | 2,500 LITRES | |||||
Foam tank volume | 500 litres | |||||
Cabin | double cabin | |||||
Chassis | Drive modle | 4x2 Right hand drive | ||||
Front axle loading | 2,400 kg loading capacity | |||||
Rear axle loading | 4,200kg loading capacity | |||||
Wheel Base | 3800mm | |||||
Front/rear suspension | 1015/2040mm | |||||
Approach/departure angle | 24/12 (°) | |||||
Tyre size & number | 7.50R16 Radial tire, with one spare tyre | |||||
Transmission | manual, 6 forwarder & 1 reverse | |||||
Voltage | Have 2 batteries , each 12 volts | |||||
Color | Red and white including tanker , standard . | |||||
Brake | Air brake | |||||
Max speed | 95km/h | |||||
Engine | Brand | YUNNEI POWER | ||||
Model | YN4102QBZL | |||||
Engine Type | 4-cylinder, in-line, water cooling, direct injection(DI) type, turbocharged, intercooling | |||||
Horse power | 116HP | |||||
Displacement | 3760ml | |||||
Emission | Euro III | |||||
TANK SPECIFICATION | ||||||
Tank capacity | 2,500 LITRES WATER TANK WITH 500 LITRES FOAM TANK | |||||
Tank material | Water tank made of carbon steel . Thickness:4mm, The foam tank is made of stainless steel | |||||
Fire pump | Model | / | CB10/30 model ,Normal pressure pump | |||
Pressure | Mpa | ≥1.0 | ||||
Max suction height | m | 7 | ||||
Flux | L/M | 1800 | ||||
Rated speed | r/min | 3000 | ||||
Time of drawing water (s) | s | ≤45 | ||||
Input | / | one nozzle , diameter : 100mm | ||||
Outlet | / | 2 nozzles, diameter: 65mm | ||||
Water-foam shooter (Monitor) | Model | / | PL24,mounted on the tank as photo,standard | |||
Fire fighting nozzle range | Water (m) | ≥45 | ||||
Foam (m) | ≥40 | |||||
Flux | L/min | 1440 | ||||
Rated Working pressure | Mpa | 0.7-1.2 | ||||
Rotation angle | (°) | 360 | ||||
Standard configuration | Have alarm rotating light and which is mounted on top of the cabin , have ladder , have manhole | |||||
EQUIPMENT LIST | ||||||
Category | Item | Specification | Quantity | |||
Fire-fighting equipment | Chassis Accessory(tools) | / | 1 | |||
Suction pipe | 150×4cm | 2 | ||||
Water filter | FLF150 | 1 | ||||
Water separator | FII80/65×3-1.6 | 1 | ||||
Siamese | JII150/80×2-1.0 | 1 | ||||
Fire hoses | 13-65-20 | 6 | ||||
Fire hoses | 13-80-20 | 4 | ||||
Increaser | KJ65/80 | 2 | ||||
Hose gaiter | DT-SB | 4 | ||||
Fire-hose protector | Length570 | 1 | ||||
Rope hose tool | / | 4 | ||||
Overground hydrant wrench | QT-DS1;Length400 | 1 | ||||
Underground hydrant wrench | Length860 | 1 | ||||
Suction wrench | FS150 | 2 | ||||
Water-stream Switch nozzle | QZG3.5/7.5;65 | 1 | ||||
Water-stream spray nozzle | QZK3.5/7.5;65 | 1 | ||||
Fire bucket | / | 1 | ||||
Aspirator foam nozzle(include pipette) | QP8/0.7Z;65 | 1 | ||||
Bubble pipette assy | Φ40×2700 | 1 | ||||
First fire Reel | DN25 ,40m | 1 | ||||
Fire forcible entry tool | Fire extinguisher | 3KG | 1 | |||
Shovel | Length1050 | 1 | ||||
Fire Axe | QTF-PF; Length 810 | 1 | ||||
T-shaped pick | QTF-DG;Length 830 | 1 | ||||
Persuader | Length 1060 | 1 | ||||
Chassis engine spare parts | Oil filter | / | 2 | |||
Fuel filter | / | 2 | ||||
Air filter | / | 2 | ||||
Belt for AC | / | 2 | ||||
Fan belt | / | 2 |
IV.Fire Truck Details
V.Fire Truck Production workshop and testing
VI.SHIPMENT ( RORO or BULK VESSEL)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
II. Details of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
III.Specification of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
TECHNICAL SPECIFICATION | ||||||
Main specification | Chassis brand | HOWO | ||||
Chassis model | ZZ1047 | |||||
Overall dimension(L*W*H) | mm | |||||
Water tank volume | 2,500 LITRES | |||||
Foam tank volume | 500 litres | |||||
Cabin | double cabin | |||||
Chassis | Drive modle | 4x2 Right hand drive | ||||
Front axle loading | 2,400 kg loading capacity | |||||
Rear axle loading | 4,200kg loading capacity | |||||
Wheel Base | 3800mm | |||||
Front/rear suspension | 1015/2040mm | |||||
Approach/departure angle | 24/12 (°) | |||||
Tyre size & number | 7.50R16 Radial tire, with one spare tyre | |||||
Transmission | manual, 6 forwarder & 1 reverse | |||||
Voltage | Have 2 batteries , each 12 volts | |||||
Color | Red and white including tanker , standard . | |||||
Brake | Air brake | |||||
Max speed | 95km/h | |||||
Engine | Brand | YUNNEI POWER | ||||
Model | YN4102QBZL | |||||
Engine Type | 4-cylinder, in-line, water cooling, direct injection(DI) type, turbocharged, intercooling | |||||
Horse power | 116HP | |||||
Displacement | 3760ml | |||||
Emission | Euro III | |||||
TANK SPECIFICATION | ||||||
Tank capacity | 2,500 LITRES WATER TANK WITH 500 LITRES FOAM TANK | |||||
Tank material | Water tank made of carbon steel . Thickness:4mm, The foam tank is made of stainless steel | |||||
Fire pump | Model | / | CB10/30 model ,Normal pressure pump | |||
Pressure | Mpa | ≥1.0 | ||||
Max suction height | m | 7 | ||||
Flux | L/M | 1800 | ||||
Rated speed | r/min | 3000 | ||||
Time of drawing water (s) | s | ≤45 | ||||
Input | / | one nozzle , diameter : 100mm | ||||
Outlet | / | 2 nozzles, diameter: 65mm | ||||
Water-foam shooter (Monitor) | Model | / | PL24,mounted on the tank as photo,standard | |||
Fire fighting nozzle range | Water (m) | ≥45 | ||||
Foam (m) | ≥40 | |||||
Flux | L/min | 1440 | ||||
Rated Working pressure | Mpa | 0.7-1.2 | ||||
Rotation angle | (°) | 360 | ||||
Standard configuration | Have alarm rotating light and which is mounted on top of the cabin , have ladder , have manhole | |||||
EQUIPMENT LIST | ||||||
Category | Item | Specification | Quantity | |||
Fire-fighting equipment | Chassis Accessory(tools) | / | 1 | |||
Suction pipe | 150×4cm | 2 | ||||
Water filter | FLF150 | 1 | ||||
Water separator | FII80/65×3-1.6 | 1 | ||||
Siamese | JII150/80×2-1.0 | 1 | ||||
Fire hoses | 13-65-20 | 6 | ||||
Fire hoses | 13-80-20 | 4 | ||||
Increaser | KJ65/80 | 2 | ||||
Hose gaiter | DT-SB | 4 | ||||
Fire-hose protector | Length570 | 1 | ||||
Rope hose tool | / | 4 | ||||
Overground hydrant wrench | QT-DS1;Length400 | 1 | ||||
Underground hydrant wrench | Length860 | 1 | ||||
Suction wrench | FS150 | 2 | ||||
Water-stream Switch nozzle | QZG3.5/7.5;65 | 1 | ||||
Water-stream spray nozzle | QZK3.5/7.5;65 | 1 | ||||
Fire bucket | / | 1 | ||||
Aspirator foam nozzle(include pipette) | QP8/0.7Z;65 | 1 | ||||
Bubble pipette assy | Φ40×2700 | 1 | ||||
First fire Reel | DN25 ,40m | 1 | ||||
Fire forcible entry tool | Fire extinguisher | 3KG | 1 | |||
Shovel | Length1050 | 1 | ||||
Fire Axe | QTF-PF; Length 810 | 1 | ||||
T-shaped pick | QTF-DG;Length 830 | 1 | ||||
Persuader | Length 1060 | 1 | ||||
Chassis engine spare parts | Oil filter | / | 2 | |||
Fuel filter | / | 2 | ||||
Air filter | / | 2 | ||||
Belt for AC | / | 2 | ||||
Fan belt | / | 2 |
IV.Fire Truck Details
V.Fire Truck Production workshop and testing
VI.SHIPMENT ( RORO or BULK VESSEL)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
II. Details of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
III.Specification of FOTON 2+4 Person Cabin 3000Liter Water Tanker Fire Truck with front install fire pump
TECHNICAL SPECIFICATION | ||||||
Main specification | Chassis brand | HOWO | ||||
Chassis model | ZZ1047 | |||||
Overall dimension(L*W*H) | mm | |||||
Water tank volume | 2,500 LITRES | |||||
Foam tank volume | 500 litres | |||||
Cabin | double cabin | |||||
Chassis | Drive modle | 4x2 Right hand drive | ||||
Front axle loading | 2,400 kg loading capacity | |||||
Rear axle loading | 4,200kg loading capacity | |||||
Wheel Base | 3800mm | |||||
Front/rear suspension | 1015/2040mm | |||||
Approach/departure angle | 24/12 (°) | |||||
Tyre size & number | 7.50R16 Radial tire, with one spare tyre | |||||
Transmission | manual, 6 forwarder & 1 reverse | |||||
Voltage | Have 2 batteries , each 12 volts | |||||
Color | Red and white including tanker , standard . | |||||
Brake | Air brake | |||||
Max speed | 95km/h | |||||
Engine | Brand | YUNNEI POWER | ||||
Model | YN4102QBZL | |||||
Engine Type | 4-cylinder, in-line, water cooling, direct injection(DI) type, turbocharged, intercooling | |||||
Horse power | 116HP | |||||
Displacement | 3760ml | |||||
Emission | Euro III | |||||
TANK SPECIFICATION | ||||||
Tank capacity | 2,500 LITRES WATER TANK WITH 500 LITRES FOAM TANK | |||||
Tank material | Water tank made of carbon steel . Thickness:4mm, The foam tank is made of stainless steel | |||||
Fire pump | Model | / | CB10/30 model ,Normal pressure pump | |||
Pressure | Mpa | ≥1.0 | ||||
Max suction height | m | 7 | ||||
Flux | L/M | 1800 | ||||
Rated speed | r/min | 3000 | ||||
Time of drawing water (s) | s | ≤45 | ||||
Input | / | one nozzle , diameter : 100mm | ||||
Outlet | / | 2 nozzles, diameter: 65mm | ||||
Water-foam shooter (Monitor) | Model | / | PL24,mounted on the tank as photo,standard | |||
Fire fighting nozzle range | Water (m) | ≥45 | ||||
Foam (m) | ≥40 | |||||
Flux | L/min | 1440 | ||||
Rated Working pressure | Mpa | 0.7-1.2 | ||||
Rotation angle | (°) | 360 | ||||
Standard configuration | Have alarm rotating light and which is mounted on top of the cabin , have ladder , have manhole | |||||
EQUIPMENT LIST | ||||||
Category | Item | Specification | Quantity | |||
Fire-fighting equipment | Chassis Accessory(tools) | / | 1 | |||
Suction pipe | 150×4cm | 2 | ||||
Water filter | FLF150 | 1 | ||||
Water separator | FII80/65×3-1.6 | 1 | ||||
Siamese | JII150/80×2-1.0 | 1 | ||||
Fire hoses | 13-65-20 | 6 | ||||
Fire hoses | 13-80-20 | 4 | ||||
Increaser | KJ65/80 | 2 | ||||
Hose gaiter | DT-SB | 4 | ||||
Fire-hose protector | Length570 | 1 | ||||
Rope hose tool | / | 4 | ||||
Overground hydrant wrench | QT-DS1;Length400 | 1 | ||||
Underground hydrant wrench | Length860 | 1 | ||||
Suction wrench | FS150 | 2 | ||||
Water-stream Switch nozzle | QZG3.5/7.5;65 | 1 | ||||
Water-stream spray nozzle | QZK3.5/7.5;65 | 1 | ||||
Fire bucket | / | 1 | ||||
Aspirator foam nozzle(include pipette) | QP8/0.7Z;65 | 1 | ||||
Bubble pipette assy | Φ40×2700 | 1 | ||||
First fire Reel | DN25 ,40m | 1 | ||||
Fire forcible entry tool | Fire extinguisher | 3KG | 1 | |||
Shovel | Length1050 | 1 | ||||
Fire Axe | QTF-PF; Length 810 | 1 | ||||
T-shaped pick | QTF-DG;Length 830 | 1 | ||||
Persuader | Length 1060 | 1 | ||||
Chassis engine spare parts | Oil filter | / | 2 | |||
Fuel filter | / | 2 | ||||
Air filter | / | 2 | ||||
Belt for AC | / | 2 | ||||
Fan belt | / | 2 |
IV.Fire Truck Details
V.Fire Truck Production workshop and testing
VI.SHIPMENT ( RORO or BULK VESSEL)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.